Home › BODY ELECTRICAL › LIGHTING › BACK DOOR COURTESY SWITCH

BACK DOOR COURTESY SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    B277751
  1. Detach the 16 clips and remove the back door trim board.



3. REMOVE BACK DOOR LOCK ASSEMBLY
  1. Disconnect the connector and detach the clamp.



  1. Disconnect the back door lock cable.


    B277797E01


    Text in Illustration 
    *1
    Back Door Lock Cable Assembly
    -
    -



    B277604
  1. Remove the 3 bolts and back door lock.