HEADLIGHT CLEANER ACTUATOR > REMOVAL |
| 1. REMOVE RADIATOR GRILLE |
![]() |
Remove the 2 clips and 2 screws.
![]() |
Put protective tape around the radiator grille.
| *1 | Protective Tape |
Detach the 6 claws and remove the radiator grille.
| 2. REMOVE FOG LIGHT COVER LH (w/ Fog Light) |
![]() |
Put protective tape around the fog light cover.
Using the screwdriver, detach the 8 claws and remove the fog light cover.
| *1 | Protective Tape |
| 3. REMOVE FOG LIGHT COVER RH (w/ Fog Light) |
| 4. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
![]() |
Put protective tape around the front bumper hole cover.
Using the screwdriver, detach the 8 claws and remove the front bumper hole cover.
| *1 | Protective Tape |
| 5. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
| 6. REMOVE FRONT BUMPER COVER |
![]() |
Remove the 6 screws and 3 clips.
![]() |
Put protective tape around the front bumper cover.
Remove the 2 screws, 2 bolts and 5 clips.
| *1 | Protective Tape |
w/ Headlight Cleaner System:
Disconnect the headlight cleaner hose, and then drain the washer fluid.
w/ Fog Light:
Disconnect the 2 fog light connectors.
![]() |
Detach the 8 claws and remove the front bumper cover.
| 7. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH |
![]() |
Extend the headlight washer nozzle by hand.
![]() |
Detach the 2 claws and remove the headlight cleaner washer nozzle.
| 8. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
![]() |
Disconnect the washer hose.
Remove the bolt.
![]() |
Detach the 2 claws and remove the headlight washer actuator sub-assembly.
| 9. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH |
| 10. REMOVE NO. 1 HEADLIGHT CLEANER HOSE |
![]() |
Detach the 3 clamps and remove the No. 1 headlight cleaner hose from the front bumper cover.