Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2KD-FTV STARTING

2KD-FTV STARTING > SERVICE DATA



for 2.2 kW Type Bosch made
Starter
No-load characteristics current
123A or less at 11.5 V
Starter armature assembly
Maximum circle runout
0.04 mm (0.0016 in.)
Standard circle runout
0.02 mm (0.0008 in.)
Standard commutator diameter
32.2 mm (1.2783 in.)
Minimum commutator diameter
31.1 mm (1.2347 in.)
Standard undercut depth
0.9 mm (0.0354 in.)
Minimum undercut depth
0.4 mm (0.0157 in.)
Segments
Below 1.7 Ω
Segment - Coil core
10 kΩ or higher
Brush
Standard length
14.0 mm (0.5558 in.)
Minimum length
9.0 mm (0.3543 in. )
Tester connection
A-B
10 kΩ or higher
Tester connection
A-C
10 kΩ or higher
Tester connection
A-D
Below 1 Ω
Tester connection
B-C
Below 1 Ω
Tester connection
B-D
10 kΩ or higher
Tester connection
C-D
10 kΩ or higher
Magnet starter switch
Terminal 50 - Terminal C
Below 1 Ω
Terminal 50 - Body
Below 2 Ω
Glow plug
Resistance
Approx. 0.95 Ω
ECT sensor
Resistance
Approx. 20°C (68°F)
2.32 to 2.59 kΩ
Approx. 80°C (176°F)
0.310 to 0.326 kΩ
Starter relay
Specified resistance
3-5
10 kΩ or higher
Below 1 Ω
(when battery voltage is applied to terminal 1 and 2)
Glow relay
Specified resistance
3-5
10 kΩ or higher
Below 1 Ω
(when battery voltage is applied to terminal 1 and 2)
Ignition switch
Tester connection
-
Switch condition
Lock
Specified condition
10 kΩ or higher
Tester connection
2 (ACC) - 4 (AM1)
Switch condition
ACC
Specified condition
Below 1 Ω
Tester connection
1 (IG1) - 4 (AM1)
2 (ACC) - 4 (AM1)
5 (AM2) - 6 (IG2)
Switch condition
ON
Specified condition
Below 1 Ω
Tester connection
1 (IG1) - 4 (AM1)
3 (ST1) - 4 (AM1)
5 (AM2) - 6 (IG2)
5 (AM2) - 7 (ST2)
Switch condition
START
Specified condition
Below 1 Ω