Home › ENGINE ยท 1KD-FTV › ENGINE MECHANICAL › DRIVE BELT

DRIVE BELT > REPLACEMENT

for Preparation Click here



1. REMOVE FAN AND GENERATOR V BELT


    G035153E01
  1. Rotate the tensioner pulley clockwise to loosen the belt's tension. Then remove the V belt.



2. INSTALL FAN AND GENERATOR V BELT
  1. Rotate the V-ribbed belt tensioner pulley clockwise, and then install the fan and generator V belt.

    NOTICE:
    Make sure that the fan and generator V belt is set properly on each pulley.

  1. Check that the indicator mark of the V-ribbed belt tensioner (Click here).