Home › BODY ELECTRICAL › METER › LIGHT CONTROL RHEOSTAT

LIGHT CONTROL RHEOSTAT > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL LIGHT CONTROL RHEOSTAT
  1. Install the light control rheostat with the nut.



2. INSTALL LIGHT CONTROL RHEOSTAT KNOB
  1. Attach the claw to install the light control rheostat knob.



3. INSTALL NO. 1 SWITCH HOLE BASE
  1. Attach the 5 claws to install the No. 1 switch hole base.