Home › BODY ELECTRICAL › METER › LIGHT CONTROL RHEOSTAT

LIGHT CONTROL RHEOSTAT > INSPECTION

for Preparation Click here



1. INSPECT LIGHT CONTROL RHEOSTAT


E224607E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Position A
    666.9 to 737.1 Ω
    Position B
    220.4 to 243.6 Ω
    Position C
    77.9 to 86.1 Ω
    Position D
    Below 1 Ω

    If the result is not as specified, replace the light control rheostat.
    Text in Illustration 
    *a
    Position A
    *b
    Position B
    *c
    Position C
    *d
    Position D
    *e
    30°
    *f
    Component without harness connected
    (Light Control Rheostat)