Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2TR-FE LUBRICATION

2TR-FE LUBRICATION > TORQUE SPECIFICATIONS



Part tightened
N*m
kgf*cm
ft.*lbf
Oil pressure switch x Cylinder block
15
153
11
Oil filter x Cylinder block
17.2
175
13
Oil drain plug x No. 2 oil pan
37.5
382
28
Oil pump cover x Timing chain cover
9.0
92
80 in.*lbf
Oil pump relief valve plug x Timing chain cover
49
500
36
Water pump x Timing chain cover
13
133
10
Timing chain cover plug x Timing chain cover
16.6
169
12
Timing chain cover x Cylinder block
Excluding the bolts labeled A and C, tighten the bolts and nuts in this order: Area 1, Area 2 and Area 3.
21
214
15
Excluding the bolts labeled A, E and F, tighten the bolts and nuts in this order: Area 1, Area 3, Area 2.
for bolt C
26
265
19
for bolt B, D and nut
21
214
15
Tighten the bolts labeled A in this order: Area 2 and Area 3.
60
612
44
Tighten the bolt labeled F.
46
469
34
Tighten the bolts labeled E in Area 4.
21
214
15
No. 1 oil pan sub-assembly x Cylinder block
26
265
19
Oil strainer sub-assembly x No. 1 oil pan sub-assembly
10
102
7
No. 2 oil pan sub-assembly x No. 1 oil pan sub-assembly
9.0
92
80 in.*lbf
Crank pulley x Crankshaft
260
2651
192
Camshaft position sensor x Cylinder head
8.5
87
75 in.*lbf
Cylinder head cover x Cylinder head
9.0
92
80 in.*lbf
No. 1 water by-pass pipe x Timing chain cover
17.5
178
13
No. 1 idler pulley x Timing chain cover
43
438
32
Drive belt tensioner x Timing chain cover
Bolt 1
40
408
30
Bolt 2
21
214
15
Bolt 3
43
438
32
Intake manifold x Cylinder head
25
255
18
Ignition coil x Cylinder head cover
9.0
92
80 in.*lbf