Home › ENGINE ยท 1KD-FTV › EMISSION CONTROL › EGR VALVE

EGR VALVE > INSPECTION

for Preparation Click here



1. INSPECT ELECTRIC EGR CONTROL VALVE ASSEMBLY


    A250410E01
  1. Inspect the electric EGR control valve.
    Text in Illustration 
    *1
    Cap

    HINT:
    Install a cap to block the other port.


    1. When a vacuum of 27 kPa (200 mmHg, 7.88 in.Hg) is applied to the diaphragm chamber, check that the shaft rises and air flows out.

    2. While maintaining the above conditions, check that there are no leaks and that the shaft stays in position.

    3. Check that the valve does not have heavy carbon deposits and is not stuck.
      If the result is not as specified, replace the electric EGR control valve.