Home › ENGINE ยท 2KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE

VACUUM REGULATING VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A252793
  1. Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.
    Text in Illustration 
    V100136
    Cap Nut



2. REMOVE NO. 1 GAS FILTER WITH GAS FILTER BRACKET


    A211909
  1. Disconnect the 2 vacuum hoses.

  1. Remove the bolt and No. 1 gas filter with gas filter bracket.



3. REMOVE ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)


    A211910
  1. Disconnect the connector.



    A211911
  1. Disconnect the 4 vacuum hoses.



    A211912
  1. Remove the 2 bolts and electric vacuum regulating valve with bracket.

    NOTICE:
    Do not remove the electric vacuum regulating valve from the bracket.