HEADLIGHT CLEANER SWITCH > INSPECTION |
| 1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 3 (B) - 4 (L) | Headlight cleaner switch on | Below 1 Ω |
| Headlight cleaner switch off | 10 kΩ or higher |
| *a | Component without harness connected (Headlight Cleaner Switch Assembly) |
Connect the positive (+) lead of the battery to terminal 1 (ILL+) and the negative (-) lead to terminal 2 (ILL-).
Check that the headlight cleaner switch assembly illumination comes on.