Home › BODY ELECTRICAL › AUDIO / VISUAL › STEERING PAD SWITCH

STEERING PAD SWITCH > REMOVAL

for Preparation Click here


CAUTION:
Some of these service operations affect the SRS. Read the precautionary notices concerning the SRS before servicing (Click here).



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE STEERING PAD ASSEMBLY



3. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Multi-information Display)


    C238004E01
  1. Disconnect the connectors and detach the 2 clamps.
    Text in Illustration 
    *1
    Pin
    *2
    Clamp

  1. Remove the 2 screws.

  1. Detach the 4 pins and remove the steering pad switch.



4. REMOVE STEERING PAD SWITCH LH (w/o Multi-information Display)

HINT:
Refer to the step "REMOVE STEERING PAD SWITCH ASSEMBLY".