DTC C1428 Motor Circuit Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| C1428 | With the motor relay off and the motor fail-safe relay on, an open in the motor circuit continues for 2 seconds or more. | Brake actuator assembly (Motor circuit) |
| 1.CHECK HARNESS AND CONNECTOR (GND2 TERMINAL) |
Turn the ignition switch off.
Disconnect the skid control ECU (brake actuator assembly) connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| S25-13 (GND2) - Body ground | Always | Below 1 Ω |
|
| ||||
| OK | ||
| ||