Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER ACTUATOR COVER

HEADLIGHT CLEANER ACTUATOR COVER > REMOVAL

for Preparation Click here



1. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH


    E225259
  1. Extend the headlight washer nozzle by hand.

    NOTICE:
    Be careful not to damage the headlight washer actuator sub-assembly or headlight washer nozzle.



    E225260
  1. Detach the 2 claws and remove the headlight cleaner washer nozzle.



2. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.