Home › BODY › INTERIOR › FRONT CONSOLE BOX

FRONT CONSOLE BOX > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL CONSOLE BOX ASSEMBLY


B278048E01
  1. Install the console box with the 4 screws and 2 bolts.

  1. Install the 2 clips.
    Text in Illustration 
    *1
    Screw
    *2
    Bolt
    *3
    Clip



2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for LHD)
  1. Attach the 12 claws to install the upper console panel.



3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for RHD)


  1. for Manual Transmission:



    1. Attach the 12 claws to install the upper console panel.


      B277219E01


      Text in Illustration 
      *A
      for 2WD
      *B
      for 4WD



  1. for Automatic Transmission:
    Attach the 12 claws to install the upper console panel.


    B277220E01


    Text in Illustration 
    *A
    for 2WD
    *B
    for 4WD



4. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
  1. Attach the 4 claws to install the parking brake hole cover.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


B277222
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.



6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


B277224
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.