Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    E225259
  1. Extend the headlight washer nozzle by hand.

    NOTICE:
    Be careful not to damage the headlight washer actuator sub-assembly or headlight washer nozzle.



    E225260
  1. Detach the 2 claws and remove the headlight cleaner washer nozzle.



2. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure described for the LH side.



3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    E225256
  1. Disconnect the washer hose.

  1. Remove the bolt.



    E225257
  1. Detach the 2 claws and remove the headlight washer actuator sub-assembly.



4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure described for the LH side.



5. REMOVE HEADLIGHT WASHER HOSE (w/ Headlight Cleaner System)


    E225255
  1. Detach the 3 clamps and remove the No. 1 headlight cleaner hose from the front bumper cover.



6. REMOVE LOWER NO. 1 RADIATOR GRILLE


    B277940
  1. Detach the 19 claws and remove the lower No. 1 radiator grille.



7. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    E226101
  1. Detach the 2 claws and clip.

  1. Remove the fog light assembly LH.



8. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.