Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Power Seat)

FRONT SEAT ASSEMBLY (for Power Seat) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE RECLINING POWER SEAT SWITCH KNOB


    B207076E02
  1. Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    B207077E02
  1. Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



3. REMOVE FRONT SEAT CUSHION SHIELD RH


    B207078
  1. Remove the 2 screws.



    B207039
  1. Remove the 3 screws.

  1. Detach the claw and guide.

  1. Remove the front seat cushion shield RH with the front inner No. 1 seat cushion shield RH.



4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD RH


    B207079
  1. Remove the 2 screws.

  1. Detach the 2 claws and remove the front inner No. 1 seat cushion shield RH from the front seat cushion shield RH.



5. REMOVE FRONT POWER SEAT SWITCH RH


    B207080
  1. Remove the 3 screws.

  1. Disconnect the connector and remove the front power seat switch RH.



6. REMOVE FRONT SEAT INNER CUSHION SHIELD RH


    B278519
  1. Remove the screw.

  1. Detach the claw and guide.



    B278520
  1. Pull the front seat inner cushion shield RH to detach the claw and remove the front seat inner cushion shield RH.



7. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
  1. Disconnect the connector and detach the 3 clamps.



    B203284
  1. Remove the nut and front seat inner belt assembly.

  1. Remove the buckle cover.



8. REMOVE FRONT SEAT CUSHION COVER RH
  1. Remove the front seat cushion cover RH.



9. REMOVE FRONT SEAT CUSHION COVER WITH PAD


    B207501
  1. Remove the hog rings.

  1. Bend the 2 front seat cushion frame claws upward.



  1. Detach the hooks and remove the front seat cushion cover with pad.


    B277279



10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B207624
  1. Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.



11. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/ Front Seat Side Airbag)


    B284720
  1. Detach the 4 front seat airbag wire harness clamps.



    B284721
  1. Disconnect the No. 1 seat wire connector and detach the wire harness clamp.



    B284723
  1. Remove the 2 screws, 4 bolts and separate type front seatback assembly.



12. REMOVE RECLINING ADJUSTER INSIDE COVER RH (w/ Front Seat Side Airbag)


    B284724
  1. Detach the guide and remove the reclining adjuster inside cover RH.



13. REMOVE RECLINING ADJUSTER INSIDE COVER LH (w/ Front Seat Side Airbag)


    B284725
  1. Detach the guide and remove the reclining adjuster inside cover LH.



14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B284721
  1. w/o Front Seat Side Airbag:
    Disconnect the No. 1 seat wire connector and detach the wire harness clamp.



    B284726
  1. Remove the hog rings from the wires of the separate type front seatback cover, and then roll up the separate type front seatback cover.

  1. Pass the No. 1 seat wire through the hole of the separate type front seatback cover.



    B284728
  1. Remove the hog rings and detach the strap of the separate type front seatback cover, and then roll up the separate type front seatback cover and No. 1 seatback cloth.



    B284730
  1. Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.



    B284732
  1. w/ Front Seat Side Airbag:
    Remove the nut and detach the separate type front seatback cover bracket.



  1. Remove the hog rings and roll up the separate type front seatback cover.


    B291611E01


    Text in Illustration 
    *a
    Front view of front seatback
    *b
    Rear view of front seatback



    B207089
  1. Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.



15. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    B207090
  1. Remove the separate type front seatback pad from the separate type front seatback spring assembly.



16. REMOVE NO. 1 SEATBACK CLOTH


    B277282
  1. Remove the No. 1 seatback cloth.



17. REMOVE RECLINING ADJUSTER INSIDE COVER RH


B207093
  1. Remove the screw.

  1. Detach the claw and remove the reclining adjuster inside cover RH.



18. REMOVE RECLINING ADJUSTER INSIDE COVER RH (w/o Front Seat Side Airbag)


B171585E02
  1. Remove the screw.

  1. Detach the guide and remove the reclining adjuster inside cover RH.



19. REMOVE RECLINING ADJUSTER INSIDE COVER LH


B207094
  1. Remove the screw.

  1. Detach the claw and remove the reclining adjuster inside cover LH.



20. REMOVE RECLINING ADJUSTER INSIDE COVER LH (w/o Front Seat Side Airbag)


B171583E02
  1. Remove the screw.

  1. Detach the guide and remove the reclining adjuster inside cover LH.



21. REMOVE POWER SEAT MOTOR ASSEMBLY (for Reclining, w/o Front Seat Side Airbag)



22. REMOVE POWER SEAT MOTOR ASSEMBLY (for Slide)



23. REMOVE POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)



24. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH


B207095
  1. Remove the screw.

  1. Detach the 4 claws and remove the front lower seat cushion shield RH.



25. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH


B207096
  1. Remove the screw.

  1. Detach the 4 claws and remove the front lower seat cushion shield LH.



26. REMOVE FRONT SEAT WIRE RH


B291580
  1. Detach the wire harness clamp.

  1. Detach the 2 claws and remove the front seat wire RH.



27. REMOVE NO. 1 SEAT WIRE


    B286469
  1. w/ Front Seat Side Airbag:
    Disconnect the front power seat motor assembly (for Reclining) connector.

  1. Detach the 2 wire harness clamps and remove the No. 1 seat wire.



28. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (w/o Front Seat Side Airbag)


    B207098
  1. Remove the 4 bolts and separate type front seatback spring assembly.