Home › BODY › SEAT › POWER SEAT SWITCH

POWER SEAT SWITCH > INSTALLATION

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. INSTALL FRONT POWER SEAT SWITCH RH
  1. Connect the connector.

  1. Install the front power seat switch RH with the 3 screws.



2. INSTALL FRONT SEAT CUSHION SHIELD RH WITH FRONT INNER NO. 1 SEAT CUSHION SHIELD RH


  1. Pass the wire harness of the front seat inner belt assembly below the claw and into the front seat inner cushion shield RH.


    B278523



    B278521
  1. Attach the claw to temporarily install the front seat inner cushion shield RH.

    NOTICE:
    Make sure that the wire harness of the front seat inner belt assembly is not being pinched inside the front seat inner cushion shield.



    B278522
  1. Attach the guide and claw.

    NOTICE:
    Make sure that the wire harness of the front seat inner belt assembly is not being pinched inside the front seat inner cushion shield.

  1. Install the screw.



3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    B207446
  1. Attach the 4 claws to install the slide and vertical power seat switch knob.



4. INSTALL RECLINING POWER SEAT SWITCH KNOB


    B207447
  1. Attach the 2 claws to install the reclining power seat switch knob.



5. INSTALL FRONT SEAT ASSEMBLY
(Click here)


6. INSPECT FRONT SEAT ASSEMBLY
(Click here)