Home › BODY › SEAT › POWER SEAT SWITCH

POWER SEAT SWITCH > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    B207076E02
  1. Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    B207077E02
  1. Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



4. REMOVE FRONT SEAT CUSHION SHIELD RH WITH FRONT INNER NO. 1 SEAT CUSHION SHIELD RH


    B207078
  1. Remove the 2 screws.



    B207039
  1. Remove the 3 screws.

  1. Detach the claw and guide.

  1. Remove the front seat cushion shield RH with the front inner No. 1 seat cushion shield RH.



5. REMOVE FRONT POWER SEAT SWITCH RH


    B207080
  1. Remove the 3 screws.

  1. Disconnect the connector and remove the front power seat switch RH.