RADIO ANTENNA CORD > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
Remove the upper instrument panel sub-assembly (Click here).
| 3. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD) |
Disconnect the connector.

Detach the 6 clamps shown in the illustration.
Remove the clamp bolt and antenna cord.
| 4. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD) |
Disconnect the connector.

Detach the 4 clamps shown in the illustration.
Remove the clamp bolt and antenna cord.