Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B278367E01


  1. for Manual Air Conditioning System:

    1. Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 10 claws and 4 clips.



    3. B278366
    4. Detach the 4 claws and disconnect the air conditioner control.

    5. Disconnect the connectors and remove the center instrument cluster finish panel.



    B278368E01
  1. for Automatic Air Conditioning System:

    1. Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 8 claws and 4 clips.

    3. Disconnect the connectors and remove the center instrument cluster finish panel.



3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)


    E225130
  1. Remove the 4 screws.

  1. Disconnect all the connectors and remove the radio receiver assembly with bracket.



4. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)


    E225131
  1. Remove the 4 screws.

  1. Disconnect all the connectors and remove the radio receiver assembly with bracket.



5. REMOVE NO. 1 RADIO BRACKET (for Radio Receiver Type)


    E225132
  1. Remove the 3 screws and No. 1 radio bracket from the radio receiver.



6. REMOVE NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type)


    E225133
  1. Remove the 3 screws and No. 1 radio bracket from the radio receiver.



7. REMOVE NO. 2 RADIO BRACKET (for Radio Receiver Type)


    E225134
  1. Remove the 4 screws and No. 2 radio bracket from the radio receiver.



8. REMOVE NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type)


    E225135
  1. Remove the 3 screws and No. 2 radio bracket from the radio receiver.