Home › BODY ELECTRICAL › LIGHTING › SIDE TURN SIGNAL LIGHT ASSEMBLY

SIDE TURN SIGNAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    B129855E08
  1. Apply battery voltage to the connector and check the bulb illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    Side turn signal light assembly LH comes on

    If the result is not as specified, replace the side turn signal light assembly LH.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly LH)



2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    B129855E08
  1. Apply battery voltage to the connector and check the bulb illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    Side turn signal light assembly RH comes on

    If the result is not as specified, replace the side turn signal light assembly RH.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly RH)