Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER SWITCH

HEADLIGHT CLEANER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 SWITCH HOLE BASE


B278246E01
  1. Put protective tape around the No. 1 switch hole base.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 5 claws.

  1. Disconnect the connectors and remove the No. 1 switch hole base.



2. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY


    E229664
  1. Detach the 2 claws and remove the switch.