REAR AIRBAG SENSOR > ON-VEHICLE INSPECTION |
| 1. CHECK REAR AIRBAG SENSOR LH (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).
| 2. CHECK REAR AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).
When the quarter panel of the vehicle or its area is damaged, check if there is any damage to the rear airbag sensor. If there are any defects as mentioned below, replace the rear airbag sensor with a new one:
| 3. CHECK REAR AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED) |
When airbags have deployed as the result of a collision, be certain to replace all rear airbag sensors in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace any rear airbag sensor in undamaged areas that have registered a major collision, or which exhibit any of the following abnormalities: