Home › BODY ELECTRICAL › LIGHTING › AUTOMATIC LIGHT CONTROL SENSOR

AUTOMATIC LIGHT CONTROL SENSOR > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR
  1. Attach the 2 claws to install the automatic light control sensor.



2. INSTALL LIGHT CONTROL SWITCH HOLE COVER


    E229494
  1. Attach the 2 claws and guide to install the light control switch hole cover.

  1. Connect the connector.



3. INSTALL COMBINATION METER ASSEMBLY
(Click here)