ECM > REMOVAL |
| 1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
| *1 | Stopper |
![]() |
Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
| *1 | Hinge |
| 2. REMOVE TURBO MOTOR DRIVER |
![]() |
Disconnect the connector.
Remove the bolt and turbo motor driver.
| 3. REMOVE TRANSMISSION CONTROL ECU (for Automatic Transmission) |
Disconnect the 3 connectors.
![]() |
Remove the 2 bolts and transmission control ECU.
| 4. REMOVE ECM |
Disconnect the 4 connectors.
![]() |
Remove the bolt, 2 nuts and ECM.
| 5. REMOVE NO. 1 ECM BRACKET |
![]() |
Remove the 3 screws and No. 1 ECM bracket.
| 6. REMOVE NO. 2 ECM BRACKET |
![]() |
Remove the 2 screws and No. 2 ECM bracket.