Home › TRANSMISSION ยท CLUTCH › CLUTCH PEDAL SWITCH

CLUTCH PEDAL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL CLUTCH SWITCH ASSEMBLY


    C223755
  1. Temporarily install the clutch switch.

  1. Adjust the clutch switch .

  1. Tighten the adjusting nut to the specified torque.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
  1. Attach the 3 guides, 2 claws and 3 clips to install the lower instrument panel finish panel.