Home › BODY › INTERIOR › ROOF HEADLINING

ROOF HEADLINING > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL NO. 1 ROOF WIRE
  1. Position the positioning tape as shown in the illustration and install the No. 1 roof wire.



  1. Apply tape in the order shown in the illustration to fix the No. 1 roof wire in place.

    HINT:
    Adjust any slack of the No. 1 roof wire as indicated by the dashed lines in the illustration and apply tape.



    B278827E01


    Text in Illustration 
    *1
    Positioning Tape
    -
    -



2. INSTALL PACKING


B276958E01

HINT:
Use the same procedure for both packings.

  1. Align a new packing with the marking on the roof headlining and install the packing to the position shown in the illustration using double-sided tape.
    Text in Illustration 
    *1
    Packing
    *2
    Marking



3. INSTALL ROOF HEADLINING PACKING


B276957E01

HINT:
Use the same procedure for both roof headlining packings.

  1. Align a new roof headlining packing with the marking on the roof headlining and install the roof headlining packing to the position shown in the illustration using double-sided tape.
    Text in Illustration 
    *1
    Packing
    *2
    Marking



4. INSTALL NO. 1 AIR OUTLET REGISTER ASSEMBLY


B205966E01
  1. Attach the 8 claws to install the bracket and No. 1 air outlet register.

  1. Install the 3 screws.
    Text in Illustration 
    *1
    Bracket
    *2
    No. 1 Air Outlet Register



5. INSTALL NO. 1 AIR OUTLET REGISTER ASSEMBLY


B205967E01

HINT:
Use the same procedure for both No. 1 air outlet registers.

  1. Attach the 4 claws to install the bracket and No. 1 air outlet register.

  1. Install the 2 screws.
    Text in Illustration 
    *1
    Bracket
    *2
    No. 1 Air Outlet Register