Home › BODY › INTERIOR › FRONT CONSOLE BOX

FRONT CONSOLE BOX > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission, for 4WD)
  1. Attach the 7 claws to install the shifting hole cover.



2. INSTALL CONSOLE BOX BEZEL (for Manual Transmission)
  1. Attach the 8 claws to install the console box bezel.

  1. Attach the 4 claws to install the shifting hole cover.

  1. Install the 4 screws.



3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY
  1. Install the rear console end panel with the 4 screws.



4. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
  1. Install the console compartment door with the 2 screws.