HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD) > INSTALLATION |
| 1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY |
![]() |
Tie the string that was passed through the engine compartment to the end of the hood lock control cable as shown in the illustration.
| *1 | String |
Pass the hood lock control cable through the vehicle body, and then attach the grommet and each clamp.
Untie the string from the hood lock control cable.

| *1 | Hood Lock Control Cable | *2 | Grommet |
| 2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
Connect the hood lock control cable to the hood lock control lever.
Attach the 3 claws to install the hood lock control lever.
| 3. INSTALL HOOD LOCK ASSEMBLY |
![]() |
Apply MP grease to the sliding areas of the lock.
Connect the hood lock control cable.
Install the hood lock with the 3 bolts.
| 4. INSTALL RADIATOR GRILLE |
Attach the 6 claws to install the radiator grille.
Install the 2 screws and 2 clips.