HOOD > REASSEMBLY |
| 1. INSTALL HOOD BUMPER CUSHION |
Install a new hood bumper cushion.
| 2. INSTALL WASHER HOSE ASSEMBLY |
![]() |
Attach the 4 clamps to then connect the washer hose to the hanger.
| *1 | Clamp |
| *2 | Hanger |
| 3. INSTALL WASHER NOZZLE SUB-ASSEMBLY |
Connect a new washer nozzle to the washer hose.
Attach the 2 claws to install the washer nozzle.
| 4. INSTALL NO. 1 HOOD BULGE PROTECTOR (w/ Intercooler) |
| Item | Temperature |
| Hood Bulge | 20 to 30°C (68 to 86°F) |
Clean the hood bulge surface.
Using a heat light, heat the hood bulge surface.
Remove the double-sided tape from the hood bulge surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new No. 1 hood bulge protector to the hood bulge as shown in the illustration.
| 5. INSTALL HOOD BULGE (w/ Intercooler) |
Install the hood bulge with the 10 nuts.
| 6. INSTALL HOOD AIR INTAKE SEAL (w/ Intercooler) |
Install the hood air intake seal with the 18 clips.
| 7. INSTALL HOOD INSULATOR (w/ Hood Insulator) |
Install the hood insulator with the 15 clips.
| 8. INSTALL HOOD TO RADIATOR SUPPORT SEAL |
Attach the 6 clips to install the hood to radiator support seal.