HOOD > DISASSEMBLY |
| 1. REMOVE HOOD TO RADIATOR SUPPORT SEAL |
![]() |
Detach the 6 clips and remove the hood to radiator support seal.
| 2. REMOVE HOOD INSULATOR (w/ Hood Insulator) |
![]() |
Remove the 15 clips and hood insulator.
| 3. REMOVE HOOD AIR INTAKE SEAL (w/ Intercooler) |
![]() |
Remove the 18 clips and hood air intake seal.
| 4. REMOVE HOOD BULGE (w/ Intercooler) |
![]() |
Remove the 10 nuts and hood bulge.
| 5. REMOVE NO. 1 HOOD BULGE PROTECTOR (w/ Intercooler) |
![]() |
Remove the No. 1 hood bulge protector from the hood bulge.
| 6. REMOVE WASHER NOZZLE SUB-ASSEMBLY |
![]() |
Using a screwdriver, detach the 2 claws as shown in the illustration.
| *1 | Protective Tape |
![]() |
Move the washer nozzle as shown in the illustration and remove it.
![]() |
Disconnect the washer nozzle from the washer hose.
| 7. REMOVE WASHER HOSE ASSEMBLY |
![]() |
Detach the 4 clamps and disconnect the washer hose from the hanger.
| *1 | Clamp |
| *2 | Hanger |
| 8. REMOVE HOOD BUMPER CUSHION |
![]() |
Remove the hood bumper cushion.