HOOD > ON-VEHICLE INSPECTION |
| 1. INSPECT HOOD SUB-ASSEMBLY |
Check that the clearance measurements of areas A to D are within the standard ranges.

| Area | Specified Condition | Area | Specified Condition |
| A (Reference) | 3.5 to 6.5 mm (0.139 to 0.256 in.) | B (Reference) | -0.8 to 2.2 mm (-0.0315 to 0.0866 in.) |
| C | 2.5 to 5.5 mm (0.0984 to 0.217 in.) | D | -1.2 to 1.8 mm (-0.0472 to 0.0709 in.) |