Home › BODY › ENGINE HOOD / DOOR › HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD) > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR GRILLE


    B277882
  1. Remove the 2 clips and 2 screws.



    B277883E01
  1. Put protective tape around the radiator grille.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 6 claws and remove the radiator grille.



2. REMOVE HOOD LOCK ASSEMBLY


    B280279
  1. Remove the 3 bolts.



    B280280
  1. Disconnect the hood lock control cable and remove the hood lock.



3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B277361
  1. Detach the 3 claws.

  1. Disconnect the hood lock control cable and remove the hood lock control lever.



4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    B277362E01
  1. Tie a string to the end of the hood lock control cable as shown in the illustration.

    HINT:
    Use a length of string long enough to pass through the engine compartment.

    Text in Illustration 
    *1
    String

  1. Detach each clamp and the grommet, and then pull out the hood lock control cable from the vehicle body.



  1. Untie the string from the hood lock control cable.


    B277363E01


    Text in Illustration 
    *1
    Hood Lock Control Cable
    *2
    Grommet