BLOWER UNIT (for Manual Air Conditioning System) > DISASSEMBLY |
| 1. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() |
Detach the 3 claws and remove the air inlet damper control cable sub-assembly.
| 2. REMOVE CLEAN AIR FILTER |
![]() |
Detach the claw and remove the air filter case.
Remove the clean air filter.
| 3. REMOVE BLOWER RESISTOR |
![]() |
Remove the 2 screws and blower resistor.
| 4. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
![]() |
Remove the 3 screws and blower motor with fan sub-assembly.