Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT (for Manual Air Conditioning System)

BLOWER UNIT (for Manual Air Conditioning System) > REASSEMBLY

for Preparation Click here



1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
  1. Install the blower motor with fan sub-assembly with 3 bolts.



2. INSTALL BLOWER RESISTOR
  1. Install the blower resistor with 2 screws.



3. INSTALL CLEAN AIR FILTER
  1. Install the clean air filter.

  1. Attach the claw to install the air filter case.



4. INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
  1. Attach the 3 claws to install the air inlet damper control cable sub-assembly.