Home › BODY › ENGINE HOOD / DOOR › BACK DOOR

BACK DOOR > DISASSEMBLY

for Preparation Click here



1. REMOVE DOOR PULL HANDLE


    B277750
  1. Detach the 4 claws and remove the door pull handle.



2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    B277751
  1. Detach the 16 clips and remove the back door trim board.



3. REMOVE BACK DOOR LOCK ASSEMBLY
  1. Disconnect the connector and detach the clamp.



  1. Disconnect the back door lock cable.


    B277797E01


    Text in Illustration 
    *1
    Back Door Lock Cable Assembly
    -
    -



    B277604
  1. Remove the 3 bolts and back door lock.



4. REMOVE BACK DOOR OUTSIDE HANDLE


    B277754
  1. Remove the 2 nuts and back door outside handle.



5. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


    E225494
  1. Disconnect the connector.

  1. Remove the 2 nuts and rear television camera assembly.



6. REMOVE BACK DOOR OUTSIDE GARNISH


    B277756
  1. w/ Rear View Monitor System:
    Remove the nut.



    B277755
  1. w/o Rear View Monitor System:
    Remove the 3 nuts.



    B277757E01
  1. Put protective tape around the back door outside garnish.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 2 clips and remove the back door outside garnish.



7. REMOVE REAR LIGHT ASSEMBLY LH


    E225393
  1. Disconnect the connector.

  1. Remove the 2 nuts.



    E227284E01
  1. Put protective tape around the rear light assembly LH.
    Text in Illustration 
    *1
    Protective tape

  1. Detach the clip and pin as shown in the illustration.

  1. Remove the rear light assembly LH.



8. REMOVE REAR LIGHT ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.



9. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    E225950
  1. Open the wiper arm head cap..



    E225948
  1. Remove the nut and the arm and blade.



10. REMOVE REAR WIPER MOTOR ASSEMBLY


B117895
  1. Disconnect the connector.

  1. Remove the 3 bolts and wiper motor.



11. REMOVE REAR WIPER MOTOR GROMMET


    E225759
  1. Remove the rear wiper motor grommet.



12. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER


    B277761
  1. Detach the 4 claws.



    B277762
  1. Disconnect the connector.

  1. Detach the clamp and remove the No. 2 back door service hole cover.



13. REMOVE REAR SPOILER


    B277763
  1. Remove the 2 grommets.



    B277764
  1. Remove the 3 nuts.



    B277765E01
  1. Put protective tape around the rear spoiler.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 4 clips and remove the rear spoiler.



14. REMOVE REAR WASHER NOZZLE SUB-ASSEMBLY


    E225252
  1. Disconnect the washer hose.

  1. Detach the 2 claws and remove the rear washer nozzle.



15. REMOVE BACK DOOR GLASS CHANNEL LH


    B089735E01
  1. Using a clip remover, remove the 2 clips.

  1. Using a screwdriver, detach the tape and remove the channel.

    HINT:
    Tape the screwdriver tip before use.



16. REMOVE BACK DOOR GLASS CHANNEL RH

HINT:
Use the same procedure described for the LH side.



17. REMOVE BACK DOOR PANEL CUSHION

HINT:
Use the same procedure for both back door panel cushions.



    B283139E01
  1. Remove the 2 back door panel cushions.
    Text in Illustration 
    *1
    for Upper Side
    *2
    for Lower Side



18. REMOVE BACK DOOR LOWER STOPPER

HINT:
Use the same procedure for both back door lower stoppers.



    B277770
  1. Remove the bolt and back door lower stopper.



19. REMOVE BACK DOOR STAY ASSEMBLY LH


    B277771
  1. Remove the 4 bolts and back door stay.

    CAUTION:
    Remove the back door stay while holding the back door.



20. REMOVE BACK DOOR STAY ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.