REAR SPOILER > REASSEMBLY |
| 1. INSTALL REAR NO. 4 SPOILER PROTECTOR |
| Item | Temperature |
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new rear No. 4 spoiler protector in the position shown in the illustration.
| 2. INSTALL REAR NO. 2 SPOILER PROTECTOR |
| Item | Temperature |
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new rear No. 2 spoiler protector in the position shown in the illustration.
| 3. INSTALL REAR NO. 1 SPOILER PROTECTOR |
| Item | Temperature |
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new rear No. 1 spoiler protector in the position shown in the illustration.
| 4. INSTALL CENTER STOP LIGHT ASSEMBLY |
Install the center stop light assembly with the 2 screws.