REAR DOOR GLASS WEATHERSTRIP > REMOVAL |
| 1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL |
![]() |
Using a moulding remover, detach the 2 clips and 2 claws.
Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.
| 2. REMOVE DOOR PULL HANDLE |
![]() |
Remove the screw and door pull handle.
| 3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Remove the screw.
Detach the 10 clips and remove the rear door trim board.
| 4. REMOVE REAR DOOR OUTER GLASS WEATHERSTRIP LH |
![]() |
Put protective tape around the rear door outer glass weatherstrip.
| *1 | Protective Tape |
Detach the 4 claws and remove the rear door outer glass weatherstrip.