BACK DOOR OUTSIDE GARNISH > REASSEMBLY |
| 1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR LH |
| Item | Temperature |
| Back Door Outside Garnish | 40 to 60°C (104 to 140°F) |
Clean the back door outside garnish surface.
Using a heat light, heat the back door outside garnish surface.
Remove the double-sided tape from the back door outside garnish surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new back door outside garnish protector in the position shown in the illustration.
| 2. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR RH |
| 3. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR |
| Item | Temperature |
| Back Door Outside Garnish | 40 to 60°C (104 to 140°F) |
Clean the back door outside garnish surface.
Using a heat light, heat the back door outside garnish surface.
Remove the double-sided tape from the back door outside garnish surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new back door outside garnish protector in the position shown in the illustration.
| 4. INSTALL BACK DOOR OUTSIDE GARNISH PAD |
| Item | Temperature |
| Back Door Outside Garnish | 40 to 60°C (104 to 140°F) |
Clean the back door outside garnish surface.
Using a heat light, heat the back door outside garnish surface.
Remove the double-sided tape from the back door outside garnish surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new back door outside garnish pad in the position shown in the illustration.
| 5. INSTALL LICENSE PLATE LIGHT ASSEMBLY |
![]() |
Install the license plate light assembly while turning it as shown in the illustration.
Attach the 2 claws to the license plate light assembly.