Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT BUMPER SIDE SUPPORT LH
  1. Attach the 2 claws to install the front bumper side support.

  1. Install the bolt and screw.



2. INSTALL FRONT BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure described for the LH side.



3. INSTALL FRONT BUMPER NO. 2 RETAINER BRACKET
  1. Install the front bumper No. 2 retainer bracket with the bolt.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



4. INSTALL FRONT BUMPER NO. 1 RETAINER BRACKET

HINT:
Use the same procedure described for the front bumper No. 2 retainer bracket.



5. INSTALL FRONT BUMPER REINFORCEMENT BRACKET
  1. Install the front bumper reinforcement bracket with the bolt.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



6. INSTALL RADIATOR SIDE DEFLECTOR LH
  1. Attach the claw to install the radiator side deflector.

  1. Install the 2 clips.



7. INSTALL RADIATOR SIDE DEFLECTOR RH

HINT:
Use the same procedure described for the LH side.



8. INSTALL FRONT BUMPER MOUNTING BRACKET

HINT:
Use the same procedure for both front bumper mounting brackets.

  1. Install the front bumper mounting bracket with the bolt.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



9. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
  1. Install the front bumper reinforcement with the 4 nuts.

    Torque:
    67 N*m{ 683 kgf*cm , 49 ft.*lbf }



10. INSTALL FRONT BUMPER REINFORCEMENT EXTENSION LH
  1. Attach the 2 claws to install the front bumper reinforcement extension.



11. INSTALL FRONT BUMPER REINFORCEMENT EXTENSION RH

HINT:
Use the same procedure described for the LH side.



12. INSTALL NO. 1 ENGINE UNDER COVER
  1. Install the No. 1 engine under cover with the 5 bolts and 4 clips.

    Torque:
    12 N*m{ 117 kgf*cm , 8 ft.*lbf }



13. INSTALL FRONT BUMPER COVER
  1. w/ Headlight Cleaner System:
    Connect the headlight cleaner hose.

  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. Attach the 8 claws to install the front bumper cover.

  1. Install the 5 clips, 2 bolts and 2 screws.

  1. Install the 3 clips and 6 screws.



14. INSTALL FOG LIGHT COVER LH (w/ Fog Light)
  1. Attach the 8 claws to install the fog light cover.



15. INSTALL FOG LIGHT COVER RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.



16. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
  1. Attach the 8 claws to install the front bumper hole cover.



17. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedure described for the LH side.



18. INSTALL RADIATOR GRILLE
  1. Attach the 6 claws to install the radiator grille.

  1. Install the 2 screws and 2 clips.



19. ADJUST FOG LIGHT AIMING (w/ Fog Light)
(Click here)