Home › BODY › EXTERIOR › SIDE MOULDING (for Rear Side)

SIDE MOULDING (for Rear Side) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL REAR NO. 2 WHEEL OPENING EXTENSION LH
  1. Install 2 new clips to the rear No. 2 wheel opening extension.

  1. Attach the 2 clips to install the rear No. 2 wheel opening extension.

  1. Install the retainer.



2. INSTALL SIDE STEP ASSEMBLY LH
  1. Install the side step with the nut and 5 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



3. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION LH
  1. Install 6 new clips to the rear No. 1 wheel opening extension.

  1. Attach the 6 clips to install the rear No. 1 wheel opening extension.

  1. Install the 2 screws.



4. INSTALL REAR BUMPER COVER
  1. Attach the 8 claws to install the rear bumper cover.

  1. Install the 6 screws and 2 clips.

  1. Install the 3 clips.



5. INSTALL REAR QUARTER PANEL MUDGUARD LH
  1. Install the rear quarter panel mudguard with the 6 screws.



6. INSTALL REAR QUARTER PANEL MUDGUARD RH

HINT:
Use the same procedure described for the LH side.