Home › ENGINE ยท 2KD-FTV › COOLING › RADIATOR

RADIATOR > ON-VEHICLE CLEANING

for Preparation Click here



1. INSPECT RADIATOR ASSEMBLY


A112201
  1. If the fins are clogged, wash them with water or a steam cleaner and dry them with compressed air.

    NOTICE:
    1. To avoid damaging the fins, the injection direction should be at right angles to the core surface.
    2. If the steam cleaner is too close to the core, there is a possibility of damaging the fins, so maintain the following injection distances.

      Standard Injection Distance:
      Injection Pressure
      Specified Condition
      2942 to 4903 kPa
      (30.0 to 50.0 kgf/cm2, 427 to 711 psi)
      300 mm (11.8 in.)
      4903 to 7845 kPa
      (50.0 to 80.0 kgf/cm2, 711 to 1138 psi)
      500 mm (19.7 in.)

    3. If the fins are bent, straighten them with a screwdriver or pliers.
    4. Do not expose electronic components to water.

  1. Dry the fins with compressed air.