Removal / installation · Vehicles built from Jun 2011
1.
REMOVE NO. 1 ENGINE UNDER COVER (for 4WD)
Remove the 8 bolts and under cover.
2.
DRAIN ENGINE COOLANT
NOTICE:
Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
Remove the reservoir cap and, using a wrench, remove the vent plug.
Loosen the cylinder block drain cock plug and the radiator drain cock plug and then drain the coolant.
HINT:
Collect the coolant in a container and dispose of it according to the regulations in your area.