Pressing Power Switch does not Turn on System
Circuit diagnosis · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
INSPECTION PROCEDURE
- HINT:
- For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
| 1. CHECK VEHICLE CONDITION |
 |
Check that conditions in the cabin are not likely to cause condensation.
- HINT:
- This problem occurs if the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.
- OK:
- Condensation is not likely being produced.
|
NG |
 |
|
| DRY OUT CABIN AND RECHECK CONDITION |
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|