2014 Hilux · Service Manual ENGINE

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014

HINT:
Intelligent tester only:

Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.
  1. Clear DTCs (Click here).
  2. Switch the ECM from normal mode to check mode using an intelligent tester (Click here).
  3. Perform a simulation test.
  4. Check and wiggle the harness(es), connector(s) and terminal(s).
← CHECK FOR INTERMITTENT PROBLEMS (Aug 2012 – Jul 2013)CHECK FOR INTERMITTENT PROBLEMS (from Aug 2014) →