Cursor or Map Rotates when Vehicle Stopped
Circuit diagnosis · Vehicles built from Aug 2013
INSPECTION PROCEDURE
| 1. CHECK CONDITION |
Check with the customer if the vehicle has been turned by a turntable.

- OK:
- Vehicle has not been turned by a turntable.
- HINT:
- If the vehicle is turned on a turntable with the ignition switch to ON, the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the ignition switch off and back to ON again with the vehicle completely stopped.
|
|
||||
| OK | ||
| ||
