REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE INTAKE AIR CONNECTOR |
Disconnect the vacuum hose.
Disconnect the No. 2 ventilation hose.
Loosen the hose clamp, and remove the 2 bolts and intake air connector.
| 2. REMOVE IGNITION COIL ASSEMBLY |
![]() ![]() |
Disconnect the 4 ignition coil connectors.
Remove the 4 bolts and pull out the 4 ignition coils.
| 3. REMOVE SPARK PLUG |
Using a 16 mm spark plug wrench, remove the 4 spark plugs.


