2014 Hilux · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)
  1. Connect the connector.

  1. Attach the 2 claws to install the cooler thermistor (solar sensor).


2. INSTALL LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System)
  1. Attach the guide and 2 claws to install the light control switch hole cover.


3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
  1. Attach the 2 claws to install the automatic light control sensor.


4. INSTALL NO. 2 INSTRUMENT PANEL CUSHION

B278067
  1. Clean the instrument panel surface.

  1. Align a new No. 2 instrument panel cushion with the markings on the upper instrument panel and install the No. 2 instrument panel cushion to the position shown in the illustration using double-sided tape.


5. INSTALL NO. 3 INSTRUMENT PANEL CUSHION

B206460
  1. Clean the instrument panel surface.

  1. Align a new No. 3 instrument panel cushion with the markings on the upper instrument panel and install the No. 3 instrument panel cushion to the position shown in the illustration using double-sided tape.


6. INSTALL NO. 4 INSTRUMENT PANEL CUSHION

B206458
  1. Clean the instrument panel surface.

  1. Align a new No. 4 instrument panel cushion with the markings on the upper instrument panel and install the No. 4 instrument panel cushion to the position shown in the illustration using double-sided tape.


7. INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY

HINT:
Use the same procedure for both instrument panel cup holders.

  1. Install the instrument panel cup holder with the 3 screws <B>.


8. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
  1. Attach the 4 claws to install the No. 2 instrument panel register.


9. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

HINT:
Use the same procedure described for the No. 2 instrument panel register.


10. INSTALL METER MOUNTING BRACKET
  1. Install the meter mounting bracket with the screw <B>.


11. INSTALL NO. 1 DEFROSTER NOZZLE OPENING PLATE (w/o Defroster)
  1. Attach the 6 claws to install the No. 1 defroster nozzle opening plate.


12. INSTALL NO. 2 DEFROSTER NOZZLE OPENING PLATE (w/o Defroster)

HINT:
Use the same procedure described for the No. 1 defroster nozzle opening plate.


13. INSTALL INSTRUMENT PANEL DOOR (w/o Front Passenger Airbag)
  1. Attach the 2 guides and 8 claws to install the instrument panel door.

  1. Install the 2 screws <B>.

← REASSEMBLY (Aug 2012 – Jul 2013)INSTALLATION (Jun 2011 – Jul 2012) →