INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL COMBINATION METER ASSEMBLY |
Connect the connectors and attach the clamp.
Install the combination meter with the 3 screws.
| 2. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL |
Attach the 2 claws and 3 guides to install the No. 1 instrument cluster finish panel.
Install the clip <C>.
