2014 Hilux · Service Manual BRAKE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2011


OPERATION CHECK
  1. Disconnect the vacuum hose from the vacuum pump.

  1. C106115E02
    Connect the hose of a vacuum gauge to the pump.

  1. Insert a plug into the other hose of the gauge.

  1. Start the engine and warm it up for more than 2 minutes.

  1. With the engine idling, measure the negative pressure of the pump.

    Standard negative pressure:
    More than 86.7 kPa (650 mmHg, 26 in.Hg)

  1. Remove the gauge from the pump.

  1. Connect the hose to the pump with the clip.

← COMPONENTS (from Jun 2011)REMOVAL (from Jun 2011) →